Home › Filament › Bulk and multi-pack filament, 4 kg, Amazon Warehouse Like New, rated 3.5 stars and up
Bulk and multi-pack filament, 4 kg, Amazon Warehouse Like New, rated 3.5 stars and up, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list. Amazon Warehouse stock is returned or open-box, graded by Amazon from Like New to Acceptable. Hover a listing's grade for Amazon's own condition note.
By finish:Translucent (2)
Condition:Any conditionNew (213)Amazon Warehouse, any grade (13)Warehouse: Like New (10)Warehouse: Very Good (1)
10 listings tracked, 10 on offer right now.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 ANYCUBIC PLA 3D Printer Filament 1.75mm, 4KG Black+White+Texture Grey+Blue |
PLA | 4 kg | 4.7 out of 5 (711 Amazon ratings) | £27.34 | £6.84 | Like New · 37% under new |
 DEEPLEE Rapid PETG Filament 1.75mm White 4KG |
PETG | 4 kg | 4.4 out of 5 (261 Amazon ratings) | £29.61 | £7.40 | Like New · 4% under new |
 DEEPLEE PLA Filament 1.75mm Black/White/Gray/Translucent 4kg Bundle |
PLA | 4 kg | 4.5 out of 5 (435 Amazon ratings) | £30.04 | £7.51 | Like New · 17% under new |
 DEEPLEE PLA Filament 1.75mm PLA Pro Black 4kg |
PLA | 4 kg | 4.6 out of 5 (62 Amazon ratings) | £30.52 | £7.63 | Like New · 7% under new |
 eSUN Enhanced PLA+ Filament 4KG, Fire Engine Red+Grey+Cold White+Black |
PLA+ | 4 kg | 4.5 out of 5 (242 Amazon ratings) | £31.33 | £7.83 | Like New · 21% under new |
 SUNLU 3D Printer Filament PETG Filament Refill 1.75mm,Suitable for SUNLU Third |
PETG | 4 kg | 4.5 out of 5 (175 Amazon ratings) | £31.58 | £7.90 | Like New · 4% under new |
 DEEPLEE PLA Plus 1.75mm Filament Black White Red Dark Blue 4kg Bundle |
PLA+ | 4 kg | 4.6 out of 5 (1,300 Amazon ratings) | £33.43 | £8.36 | Like New · 4% under new |
 SUNLU 4KG ABS Filament 1.75mm, Heat Resistant 3D Printer Filament |
ABS | 4 kg | 4.2 out of 5 (79 Amazon ratings) | £34.18 | £8.55 | Like New · 4% under new |
 SUNLU 3D Printer Filament PETG Filament Refill 1.75mm,Suitable for SUNLU Third |
PETG | 4 kg | 4.5 out of 5 (175 Amazon ratings) | £38.44 | £9.61 | Like New · 6% under new |
 eSUN PLA+ 3D Printing Filament 4KG, Enhanced Toughness, Black |
PLA+ | 4 kg | 4.5 out of 5 (242 Amazon ratings) | £45.23 | £11.31 | Like New · 1% under new |
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.