Home › Filament › Bulk and multi-pack filament, 2 kg, Amazon Warehouse Like New, rated 4.5 stars and up
Bulk and multi-pack filament, 2 kg, Amazon Warehouse Like New, rated 4.5 stars and up, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list. Amazon Warehouse stock is returned or open-box, graded by Amazon from Like New to Acceptable. Hover a listing's grade for Amazon's own condition note.
By material:PLA+ (4)
Condition:Any conditionNew (150)Amazon Warehouse, any grade (10)Warehouse: Like New (4)Warehouse: Very Good (3)
4 listings tracked, 4 on offer right now.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 DEEPLEE PLA Plus 1.75mm Filament White/Grey 2kg Bundle |
PLA+ | 2 kg | 4.6 out of 5 (1,300 Amazon ratings) | £15.29 | £7.65 | Like New · 23% under new |
 eSUN PLA+ Filament 1.75mm, Enhanced Toughness 3D Printer Filament PLA Plus, Di |
PLA+ | 2 kg | 4.5 out of 5 (1,309 Amazon ratings) | £17.81 | £8.91 | Like New · 22% under new |
 ELEGOO PLA+ 3D Printer Filament 1.75mm Grey 2KG |
PLA+ | 2 kg | 4.5 out of 5 (81 Amazon ratings) | £20.37 | £10.19 | Like New · 18% under new |
 ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG Black*2 |
PLA+ | 2 kg | 4.6 out of 5 (19 Amazon ratings) | £23.83 | £11.92 | Like New · 8% under new |
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.