Home › Filament ›
Bulk and multi-pack filament, 10 kg and over, rated 4 stars and up
Bulk and multi-pack filament, 10 kg and over, rated 4 stars and up, ranked by £/kg — on offer now
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.
10 currently discounted.
| Product | Material |
Weight | Rating | Price |
Per kg | Deal |
 IEMAI PETG Filament 1.75mm 12KG, PETG Black/White/Red/Orange/Yellow/Pink/Beige |
PETG |
12 kg | ★★★★½ 4.5 out of 5 (260 Amazon ratings) |
£83.55 |
£6.96 |
Warehouse · 7% under new
|
 YUANEANG 3D Printer PLA Filament, Triple Color PLA Filament Bundle, 1kg Spool( |
PLA |
16 kg | ★★★★☆ 4.1 out of 5 (472 Amazon ratings) |
£119.99 |
£7.50 |
— |
 ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG Bright White*10 |
PLA+ |
10 kg | ★★★★☆ 4.2 out of 5 (55 Amazon ratings) |
£80.73 |
£8.07 |
15% below
|
 ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG Pearl Black*10 |
PLA+ |
10 kg | ★★★★½ 4.3 out of 5 (58 Amazon ratings) |
£82.44 |
£8.24 |
15% below
|
 Kingroon PLA+ Filament 1.75mm, PLA Plus 10 Roll Dimensional Accuracy ±0,02mm, |
PLA+ |
10 kg | ★★★★★ 4.8 out of 5 (14 Amazon ratings) |
£84.99 |
£8.50 |
29% below
|
 RAMBERY Matte Rainbow PLA 3D Printer Filament Bundle, 10 Colors Total 10kg, 1. |
PLA |
10 kg | ★★★★★ 4.9 out of 5 (11 Amazon ratings) |
£96.40 |
£9.64 |
58% below
|
 eSUN PLA+ Filament 1.75mm, 10KG Enhanced Toughness PLA Plus, Cold White |
PLA+ |
10 kg | ★★★★½ 4.3 out of 5 (21 Amazon ratings) |
£99.99 |
£10.00 |
13% below
|
 IEMAI PETG Filament 1.75mm 10KG, Black PETG 3D Printer Filament, Compatible wi |
PETG |
10 kg | ★★★★½ 4.5 out of 5 (262 Amazon ratings) |
£106.62 |
£10.66 |
— |
 Kingroon PETG 3D Printer Filament, 10 Rolls, Dimensional Accuracy +/- 0.03 mm, |
PETG |
10 kg | ★★★★½ 4.4 out of 5 (512 Amazon ratings) |
£230.75 |
£23.08 |
— |
 ELEGOO PLA Basic Refill 3D Printer Filament 1.75mm Dark Green 29KG |
PLA |
29 kg | ★★★★½ 4.6 out of 5 (550 Amazon ratings) |
£38.99 |
— |
— |
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling
Filament by year — which actually sold best, going
back several years, ranked by sales position rather than opinion.