Home › Filament › Glow in the dark filament, Amazon Warehouse, rated 3.5 stars and up
Glow in the dark filament, Amazon Warehouse, rated 3.5 stars and up, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list. Amazon Warehouse stock is returned or open-box and is graded from Like New to Acceptable; the grade and the condition note are on the Amazon listing, so read them before you buy.
Hardened vs brass nozzles for abrasive filament →
By material:PLA (3)
By finish:All finishesSilk (21)Matte (22)Dual & triple colour (12)Rainbow & gradient (6)Translucent (5)Glow in the dark (3)Sparkle & glitter (4)Marble (3)Wood (1)
By pack:Single spools (2)
By weight:1 kg (3)
3 listings tracked, 2 on offer right now.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 ZIRO PLA Glow in Dark Filament 1.75mm, 3D Printer Filament PLA PRO 1KG |
PLA | 1 kg | 4.2 out of 5 (886 Amazon ratings) | £12.92 | £12.92 | Warehouse |
 ZIRO Glow in the Dark PLA Filament 1.75mm, 3D Printer Filament PLA PRO 1KG |
PLA | 1 kg | 4.2 out of 5 (268 Amazon ratings) | £14.05 | £14.05 | Warehouse · 17% under new |
 RepRapper Glow in The Dark PLA Filament 1.75mm (4×250g) – High-Brightness Lumi |
PLA | 1 kg | 4.2 out of 5 (1,686 Amazon ratings) | £17.45 | £17.45 | Warehouse |
Glow in the dark filament by brand
All brands
SUNLU (6)
iSANMATE (5)
Eono (3)
ERYONE (3)
RAMBERY (3)
RepRapper (3)
Chitu Systems (2)
iBOSS (2)
TECBEARS (2)
AMOLEN (1)
Creality (1)
eSUN (1)
Gizmo Dorks (1)
IEMAI (1)
Kingroon (1)
OVERTURE (1)
Stronghero3D (1)
TINMORRY (1)
Winkle (1)
YIWEOG (1)
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.