Home › Filament › Dual & triple colour filament, 10 kg and over, bulk and multi-pack, new
Dual & triple colour filament, 10 kg and over, bulk and multi-pack, new, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.
Dual and triple colour silk, and how to print it →
By material:PLA (5)
By finish:All finishesSilk (4)Matte (2)Dual & triple colour (5)Rainbow & gradient (3)Translucent (6)
5 listings tracked, 2 on offer right now.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 YUANEANG 3D Printer PLA Filament, Triple Color PLA Filament Bundle, 1kg Spool( |
PLA | 16 kg | 4.1 out of 5 (472 Amazon ratings) | £119.99 | £7.50 | — |
| YUANEANG PLA Filament, Triple Color Silk PLA Filament 10 Rolls, 10kg Spool(22l | PLA | 10 kg | — | £87.99 | £8.80 | — |
 Kingroon Silk PLA Triple Color Filament, Multicolor PLA Filament 10 Rolls, 10k |
PLA | 10 kg | 4.6 out of 5 (136 Amazon ratings) | £110.49 | £11.05 | 15% below |
 Kingroon PLA Filament Bundle 1.75mm for 3D Printer, Filament 3D Printing Mater |
PLA | 10 kg | 4.6 out of 5 (136 Amazon ratings) | £119.99 | £12.00 | — |
| Kingroon 10KG Silk PLA Filament, Tri Color PLA Filament, Multicolor 3D Printer |
PLA | 10 kg | — | £247.99 | £24.80 | — |
Dual & triple colour filament by brand
All brands
SUNLU (32)
ERYONE (20)
iBOSS (20)
eSUN (16)
LANDU (13)
Chitu Systems (10)
Kingroon (10)
AMOLEN (9)
NEOTRY (9)
R3D (9)
iSANMATE (7)
FLASHFORGE (6)
LOVOON (5)
JAYO (4)
OVVNYXE (4)
XINGTONGZHILIAN (4)
Cookiecad (3)
Deeplee (3)
Eono (3)
RepRapper (3)
ANYCUBIC (2)
GEEETECH (2)
GIANTARM (2)
RAMBERY (2)
YUANEANG (2)
ELEGOO (1)
Gizmo Dorks (1)
Inslogic (1)
Polymaker (1)
Winkle (1)
YIWEOG (1)
yxpolyer (1)
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.