Home › Filament › Dual & triple colour filament, bulk and multi-pack, Amazon Warehouse
Dual & triple colour filament, bulk and multi-pack, Amazon Warehouse, ranked by £/kg — on offer now
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list. Amazon Warehouse stock is returned or open-box, graded by Amazon from Like New to Acceptable. Hover a listing's grade for Amazon's own condition note.
Dual and triple colour silk, and how to print it →
By material:PLA (1)
By finish:All finishesSilk (1)Matte (4)Dual & triple colour (1)Rainbow & gradient (1)Translucent (3)Refills (no spool) (4)
By weight:2 kg (1)
0 currently discounted.
Nothing matching right now — the scanner runs several times a day, so check back.
Dual & triple colour filament by brand
All brands
iBOSS (45)
Chitu Systems (36)
SUNLU (35)
ERYONE (29)
eSUN (24)
LANDU (24)
Kingroon (19)
AMOLEN (17)
XINGTONGZHILIAN (16)
OVVNYXE (14)
NEOTRY (13)
LOVOON (12)
Polymaker (11)
dikale (10)
R3D (10)
ANYCUBIC (9)
iSANMATE (9)
GIANTARM (8)
AICOPYTO (7)
FLASHFORGE (7)
GEEETECH (7)
YUANEANG (7)
3Dgenius (6)
Semdon (6)
3DHoJor (5)
JAYO (5)
CC3D (4)
Cookiecad (4)
RepRapper (4)
Amoybaby (3)
Deeplee (3)
ELEGOO (3)
Eono (3)
GratKit (3)
Inslogic (3)
MIKA3D (3)
RAMBERY (3)
XZN (3)
YOOPAI (3)
IEMAI (2)
Winkle (2)
CHCKX (1)
Fafeicy (1)
FilaBees (1)
Gizmo Dorks (1)
HP3DF (1)
Sovol (1)
Stronghero3D (1)
TEWIRROW (1)
YIWEOG (1)
yxpolyer (1)
ZIRO (1)
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.