Home › Filament › Silk filament, under 1 kg, Amazon Warehouse
Silk filament, under 1 kg, Amazon Warehouse, ranked by £/kg — on offer now
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list. Amazon Warehouse stock is returned or open-box and is graded from Like New to Acceptable; the grade and the condition note are on the Amazon listing, so read them before you buy.
How to print silk filament well →
By material:PLA (3)
By pack:Single spools (1)
By colour:Green (1)
1 currently discounted.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 ERYONE PLA Silk Shiny 3D Printer Filament 1.75mm, Triple Silk PLA Filament, Co |
PLA | 0.25 kg | 4.4 out of 5 (900 Amazon ratings) | £6.28 | £25.12 | Warehouse |
Silk filament by brand
All brands
SUNLU (78)
ERYONE (33)
iBOSS (28)
AMOLEN (25)
LANDU (22)
eSUN (21)
Kingroon (16)
NEOTRY (12)
Chitu Systems (10)
R3D (9)
Deeplee (8)
GIANTARM (8)
Winkle (7)
CC3D (6)
Eono (6)
FLASHFORGE (6)
JAYO (6)
LOVOON (6)
Bambu Lab (5)
GEEETECH (5)
OVVNYXE (5)
RAMBERY (5)
Stronghero3D (5)
XINGTONGZHILIAN (5)
OVERTURE (4)
RepRapper (4)
Amazon Basics (3)
iSANMATE (3)
kexcelled (3)
TINMORRY (3)
ANYCUBIC (2)
Cookiecad (2)
ELEGOO (2)
NextShapes (2)
TECBEARS (2)
YIWEOG (2)
YUANEANG (2)
Creality (1)
Gizmo Dorks (1)
Inslogic (1)
Polymaker (1)
yxpolyer (1)
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.