Home › Filament › Sparkle & glitter filament, under 1 kg, single spools, rated 4.5 stars and up
Sparkle & glitter filament, under 1 kg, single spools, rated 4.5 stars and up, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.
Hardened vs brass nozzles for abrasive filament →
By material:TPU (1)
By colour:Blue (1)
Condition:New (1)
1 listings tracked.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 SainSmart Small Spool 1.75 mm TPU Flexible 3D Filament 250 g, Dimensional Accu |
TPU | 0.25 kg | 4.6 out of 5 (2,170 Amazon ratings) | £20.48 | £81.92 | — |
Sparkle & glitter filament by brand
All brands
TINMORRY (8)
Creality (7)
iSANMATE (5)
ELEGOO (4)
IEMAI (4)
Stronghero3D (4)
Polymaker (3)
Eono (2)
kexcelled (2)
LOVOON (2)
Prusament (2)
3DFUEL FUELING YOUR CREATIVITY (1)
AMOLEN (1)
ANYCUBIC (1)
CC3D (1)
Cookiecad (1)
Deeplee (1)
FLASHFORGE (1)
iBOSS (1)
SainSmart (1)
Spectrum Filaments (1)
Winkle (1)
YIWEOG (1)
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.