Home › Filament › Translucent filament, 10 kg and over, bulk and multi-pack

Translucent filament, 10 kg and over, bulk and multi-pack, ranked by £/kg

Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.

7 listings tracked, 2 on offer right now.

Product	Material	Weight	Rating	Price	Per kg	Deal
IEMAI PETG Filament 1.75mm 10Kg, Gradient Translucent PETG 3D Printer Filament	PETG	10 kg	★★★★½ 4.6 out of 5 (223 Amazon ratings)	£84.99	£8.50	15% below
Kingroon 16KG PETG Filament Bundle 1.75mm for 3D Printer, 3D Printing Filament	PETG	16 kg	★★★★½ 4.5 out of 5 (51 Amazon ratings)	£139.99	£8.75	—
Kingroon 10KG PLA Filament Bundle 1.75mm for 3D Printer, Multicolor 3D Filamen	PLA	10 kg	★★★★½ 4.3 out of 5 (566 Amazon ratings)	£93.49	£9.35	15% below
PETG Filament 1.75mm 2025 Upgrade Spool Compatible with Bambulab Refill Filame	PETG	10 kg	★★★½☆ 3.7 out of 5 (7 Amazon ratings)	£105.09	£10.51	62% below
IEMAI PETG Filament 1.75mm 10Kg,Transparent/Gray/Red/Orange/Blue/Fluorescent G	PETG	10 kg	★★★★½ 4.5 out of 5 (592 Amazon ratings)	£123.58	£12.36	—
Kingroon PETG 3D Printer Filament, 10 Rolls, Dimensional Accuracy +/- 0.03 mm,	PETG	10 kg	★★★★½ 4.4 out of 5 (512 Amazon ratings)	£230.75	£23.08	—
SUNLU 10KG PLA+ 3D Printer Filament Bundle, PLA Plus Filament 1.75mm, Toughnes	PLA+	10 kg	★★★★½ 4.5 out of 5 (14,770 Amazon ratings)	—	—	—

Translucent filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.