Home › Filament › Translucent filament, 2 kg, bulk and multi-pack

Translucent filament, 2 kg, bulk and multi-pack, ranked by £/kg

Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.

12 listings tracked.

Product	Material	Weight	Rating	Price	Per kg	Deal
DEEPLEE PLA Plus 1.75mm Filament Translucent 2kg Bundle	PLA+	2 kg	★★★★½ 4.6 out of 5 (1,004 Amazon ratings)	£14.44	£7.22	15% below
no image yet DEEPLEE PETG Pro Filament Translucent 2kg	PETG	2 kg	—	£18.68	£9.34	—
IEMAI PETG Filament 1.75mm 2Kg, Gradient Blue Purple/Blue Green Translucent PE	PETG	2 kg	★★★★½ 4.6 out of 5 (220 Amazon ratings)	£19.54	£9.77	24% below
SUNLU 3D Printer PLA+ Filament Bundle, Muticolor Transparent PLA Plus Filament	PLA+	2 kg	★★★★½ 4.5 out of 5 (537 Amazon ratings)	£31.98	£15.99	8% below
Creality PETG Filament 1.75, 3D Printer Filament: Excellent Toughness High Pre	PETG	2 kg	—	£59.11	£29.56	—
Creality PETG Filament 1.75, 3D Printer Filament: Excellent Toughness High Pre	PETG	2 kg	★★★★½ 4.3 out of 5 (3 Amazon ratings)	£60.19	£30.10	—
iSANMATE Rapid Clear PLA Filament Bundle 250GX8, 3D Printer Filament Transpare	PLA	2 kg	★★★★☆ 4.2 out of 5 (115 Amazon ratings)	£67.30	£33.65	—
SUNLU 500g PLA Refill Filament 1.75mm, Refill PLA 3D Printer Filament Suitable	PLA	2 kg	★★★★½ 4.5 out of 5 (7,786 Amazon ratings)	—	—	—
SUNLU 250G*8 PLA+ Filament, Longer Durability and High Strength, 250G per Spoo	PLA+	2 kg	★★★★½ 4.5 out of 5 (14 Amazon ratings)	—	—	—
IEMAI PETG Filament 1.75mm 2Kg, Transparent Gray/Clear PETG 3D Printer Filamen	PETG	2 kg	★★★★½ 4.5 out of 5 (582 Amazon ratings)	—	—	—
IEMAI Transparent PETG Filament 1.75 mm, 8 Rolls 0.25 kg, Transparent/Red/Oran	PETG	2 kg	★★★★★ 5.0 out of 5 (1 Amazon ratings)	—	—	—
ELEGOO PLA+ 3D Printer Filament 1.75mm Translucent 1KG (Pack of 2)	PLA+	2 kg	—	—	—	—

Translucent filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.