Home › Filament › Translucent filament, 4 kg, bulk and multi-pack

Translucent filament, 4 kg, bulk and multi-pack, ranked by £/kg

Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.

9 listings tracked, 4 on offer right now.

Product	Material	Weight	Rating	Price	Per kg	Deal
SUNLU PLA+ Filament Refill 1.75mm 4KG, No-Spool PLA Plus Refill for Reusable S	PLA+	4 kg	★★★★½ 4.4 out of 5 (224 Amazon ratings)	£29.99	£7.50	9% below
DEEPLEE PLA Filament 1.75mm Black/White/Gray/Translucent 4kg Bundle	PLA	4 kg	★★★★½ 4.6 out of 5 (414 Amazon ratings)	£31.41	£7.85	Warehouse
SUNLU 4KG Transparent PLA Filament 1.75mm, Neatly Wound 3D Printer Filament	PLA	4 kg	★★★★☆ 3.9 out of 5 (8 Amazon ratings)	£32.29	£8.07	15% below
SUNLU 4KG PETG Filament Bundle, Black+White+Gray+Transparent White	PETG	4 kg	★★★★½ 4.5 out of 5 (339 Amazon ratings)	£34.19	£8.55	14% below
SUNLU PLA+ Filament Refill 1.75mm 4KG, No-Spool PLA Plus Refill for Reusable S	PLA+	4 kg	★★★★½ 4.4 out of 5 (253 Amazon ratings)	£35.09	£8.77	Warehouse · 7% under new
ELEGOO PLA+ 3D Printer Filament 1.75mm 4KG Black/White/Grey/Translucent	PLA+	4 kg	★★★★½ 4.5 out of 5 (6 Amazon ratings)	£37.39	£9.35	15% below
SUNLU 3D Printer Filament PETG Filament Refill 1.75mm,Suitable for SUNLU Third	PETG	4 kg	★★★★½ 4.5 out of 5 (175 Amazon ratings)	£39.15	£9.79	Warehouse · 4% under new
SUNLU 4KG PLA Plus 3D Printer Filament PLA+ 1.75mm, Neatly Wound PLA Filament	PLA+	4 kg	—	—	—	—
Creality CR Refill PETG 3D Printer Filament 1.75mm, Glossy Translucent Finish,	PETG	4 kg	★★★★★ 5.0 out of 5 (1 Amazon ratings)	—	—	—

Translucent filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.