Creality K2 Plus 3D Printer, Support Multi Color Printing Max 600mm/s Fast Printing, Dual AI Cameras, Full-auto Leveling, Ready-to-Use FDM 3D Printers, Large Build Volume 350x350x350mm
3.6 out of 5 (3 Amazon ratings) on Amazon
Price shown was last seen 3d ago. Amazon prices change frequently — check before buying.
Specification
| Brand | Creality |
| Condition | New |
| ASIN | B0DDWHR8XR |
| Type | Multi-colour, High-speed, Auto-levelling, Large build volume |
Our review: Creality K2 Plus
Desk research, not hands-on testing: specifications, independent reviews, documented issues and buyer data. Both scores are calculated from the inputs listed below. How we score
Verdict: A big, enclosed, actively heated CoreXY printer with a 350 mm build volume, a 350°C nozzle and up to 16-colour printing through Creality’s CFS. It is a premium machine, and Tom’s Hardware found slicer and firmware bugs alongside a slow bed warm-up.
9 / 10 Technical difficulty: Low
3.4 / 10 From buyer ratings, track record and known issues
- 350 × 350 × 350 mm build volume, the largest enclosed printer in our reviews
- Actively heated chamber up to 60°C for ABS, ASA and engineering filaments
- 350°C nozzle with a hardened steel tip, and a 120°C bed
- The Combo includes a four-colour CFS, expandable to 16 colours with more units
- Two AI cameras, a 4.3-inch touchscreen and a run-out sensor inside the extruder
- A premium price, especially as the Combo
- Slow bed warm-up, according to Tom’s Hardware
- The high-flow nozzle adds to the filament wasted on colour changes
- Slicer and firmware bugs reported, especially with TPU and purge settings
- A large machine that needs plenty of space
Best for: Experienced makers who want large multi-colour prints and engineering filaments from one enclosed machine.
Look elsewhere if: You are a first-time buyer on a budget, short of space, or only print small PLA parts.
How the ease-of-use score is built
| Arrives assembled: first print in about 30 minutes | ✓ +2 |
| Automatic bed levelling | ✓ +2 |
| Automatic vibration or flow calibration | ✓ +1 |
| App or network printing | ✓ +1 |
| Filament run-out or tangle detection | ✓ +1 |
| Tool-free nozzle swap | ✗ 0 of 1 |
| Touchscreen | ✓ +1 |
| Built-in camera | ✓ +1 |
How the reliability indicator is built
| Amazon buyer rating 3.8 out of 5 (3 stars scores 0, 5 stars scores 6) | +2.4 |
| Confidence from 17 buyer reviews | +0.0 |
| Track record: model launched 2024 | +1.5 |
| Tom’s Hardware found slicer and firmware bugs, especially when printing TPU and controlling purge volumes. | -0.5 |
This printer is sold under several Amazon listings. The buyer rating comes from the one with the most reviews, so it is the same wherever this review appears.
Who it suits
The K2 Plus, launched in mid-2024, is Creality’s flagship: a large, enclosed CoreXY printer with an actively heated chamber and Creality’s CFS multi-colour system. It suits experienced makers who print big, colourful or demanding parts. For a first printer, it is more machine, and more money, than most people need.
Setting it up
It arrives about 95% assembled, then levels and calibrates itself. A 4.3-inch touchscreen, Creality’s app and two AI cameras cover control and monitoring, and a run-out sensor sits inside the extruder, close to the nozzle. It scores 9 on our ease-of-use checklist. Creality describes the nozzle as quick-change, but we could not confirm the swap is tool-free, so it does not get that point.
Printing with it
The 350 mm cube build volume fits helmets and large parts in one piece. The chamber heats to 60°C, which is what ABS, ASA and nylon-based filaments need to avoid warping and cracking on large parts, and the 350°C hardened-tip nozzle handles filled materials. See enclosed vs open frame.
The Combo’s CFS holds four spools, and up to four units can be connected for 16 colours. Tom’s Hardware noted that the large high-flow nozzle adds to the filament purged on every colour change: see whether multi-colour is worth it.
Living with it
The big bed takes a while to warm up, and Tom’s Hardware ran into slicer and firmware bugs, especially with TPU and purge settings. Firmware updates can fix software problems, but it was notable enough in a published review to cost half a point on our reliability indicator. Make sure you have the space before buying.
Is today’s price a good deal?
The K2 Plus is sold alone and as a CFS Combo, at very different prices. Creality also sells smaller K2 and K2 Pro models, so check the listing is the Plus. Then compare today’s price with this page’s history before buying.
Key specifications
| Type | Filament (FDM), enclosed CoreXY |
| Build volume | 350 × 350 × 350 mm |
| Temperatures | Nozzle 350°C, bed 120°C, chamber 60°C |
| Multi-colour | CFS, 4 spools per unit, up to 4 units |
| Screen | 4.3-inch touchscreen |
| Cameras | Two AI cameras |
| Assembly | Arrives about 95% assembled |
| On sale since | 2024 |
Sources: Creality K2 Plus Combo product page · Tom’s Hardware K2 Plus review · 3DWork K2 series review · All3DP launch coverage. Review last updated 11 September 2026. Compare all reviewed printers
Printer finder
Is the Creality K2 Plus right for you?
Answer up to six quick questions and we will recommend the best fit from the 20 printers we have reviewed, at today’s prices. Start with the first one: