FLASHFORGE Adventurer 5M 3D Printer, 600mm/s High Speed Printing, Fully Auto Leveling Printer with Quick Detachable 280℃ Direct Extruder, Vibration Compensation, Large Printing Size 220 * 220 * 220mm
4.1 out of 5 (399 Amazon ratings) on Amazon
Price shown was last seen 3d ago. Amazon prices change frequently — check before buying.
Specification
| Brand | Voxelab |
| Condition | New |
| ASIN | B0CS9JKL3M |
| Type | High-speed, Auto-levelling |
Our review: Flashforge Adventurer 5M
Desk research, not hands-on testing: specifications, independent reviews, documented issues and buyer data. Both scores are calculated from the inputs listed below. How we score
Verdict: Most of the 5M Pro’s convenience for less money, minus the enclosure, filter and camera. A very easy open-frame CoreXY printer for PLA and PETG.
9 / 10 Technical difficulty: Low
5.9 / 10 From buyer ratings, track record and known issues
- Arrives assembled, with automatic bed levelling
- Fast CoreXY motion with a built-in vibration compensation test
- Tool-free quick-release nozzle for changing sizes in seconds
- Filament run-out detection and a 4.3-inch touchscreen
- App and network printing
- Open frame: ABS and ASA are hard to print well without an enclosure
- No built-in camera
- 220 × 220 × 220 mm build volume is smaller than 256 mm rivals
- Nozzles are proprietary quick-swap assemblies rather than standard screw-in nozzles
Best for: Beginners who want a fast, self-levelling printer with tool-free nozzle swaps for everyday PLA and PETG printing.
Look elsewhere if: You want to print ABS or ASA, or to watch your prints remotely on a camera.
How the ease-of-use score is built
| Arrives assembled: first print in about 30 minutes | ✓ +2 |
| Automatic bed levelling | ✓ +2 |
| Automatic vibration or flow calibration | ✓ +1 |
| App or network printing | ✓ +1 |
| Filament run-out or tangle detection | ✓ +1 |
| Tool-free nozzle swap | ✓ +1 |
| Touchscreen | ✓ +1 |
| Built-in camera | ✗ 0 of 1 |
How the reliability indicator is built
| Amazon buyer rating 4.3 out of 5 (3 stars scores 0, 5 stars scores 6) | +3.9 |
| Confidence: none. Amazon pools these 545 buyer reviews with the Flashforge Adventurer 5M Pro | +0.0 |
| Track record: model launched 2023 | +2.0 |
Amazon pools reviews across this listing’s variations, so the buyer rating describes the product family, not this exact configuration.
Amazon shows the same rating and review count on a listing of the Flashforge Adventurer 5M Pro, a different printer. Its reviews are pooled across models, so the review count earns no confidence points here.
This printer is sold under several Amazon listings. The buyer rating comes from the one with the most reviews, so it is the same wherever this review appears.
Who it suits
The Adventurer 5M is for beginners who want a fast, low-maintenance printer and are happy to stick to the easy materials. It shares its motion system, hotend and levelling with the more expensive 5M Pro, so day-to-day printing feels much the same.
Setting it up
It arrives assembled and levels itself automatically, with a vibration compensation test for clean surfaces at speed. The touchscreen, Flashforge app and slicer cover everything a beginner needs. The only item it misses on our ease-of-use checklist is a camera, which published reviews confirm it does not have.
Printing with it
Unusually for its price, it is a CoreXY printer: the bed only moves down, and the light print head does the fast moves. That makes it quick and stable with tall prints, and more compact than a bed-slinger with the same bed. See bed-slinger vs CoreXY.
PLA, PETG and TPU are its materials. Although the nozzle reaches 280°C, there is no enclosure, so ABS and ASA are a struggle. If those matter, the 5M Pro is the better buy.
Living with it
The quick-release nozzle is one of its best features, making swaps and clog recovery easy. Replacement nozzles are Flashforge assemblies rather than generic nozzles, so they cost more each. Without a camera, you will need to check on long prints in person or rely on the app’s status updates.
Amazon pools ratings across Adventurer 5M listings, so the rating in our reliability indicator describes the 5M family rather than this exact printer.
5M or 5M Pro?
Choose the 5M if you will print PLA and PETG and want to save money. Choose the Pro for ABS and ASA, filtered air, a camera, or a printer in a room people use. Compare today’s prices for both in our review table, and check this listing’s price history below before buying.
Key specifications
| Type | Filament (FDM), open-frame CoreXY |
| Build volume | 220 × 220 × 220 mm |
| Max nozzle / bed temperature | 280°C / 100°C |
| Levelling | Automatic |
| Nozzle | Tool-free quick-release |
| Screen | 4.3-inch touchscreen |
| Camera | None |
| On sale since | 2023 |
Sources: Flashforge Adventurer 5M product page · TechGearLab Adventurer 5M review · Flashforge nozzle assembly. Review last updated 11 September 2026. Compare all reviewed printers
Recent price history
| Seen | Price | Condition |
|---|---|---|
| 22 Oct 2026, 19:50 | £209.00 | New |
| 15 Oct 2026, 06:50 | £209.00 | New |
| 11 Sep 2026, 00:10 | £209.00 | New |
How this price compares
Among the lowest this has been in the past year.
It was cheaper than this for 5% of the last year.
“Typical” is a time-weighted median of the real price history — the price this product held for most of the period, not an average. We use the median because averages are distorted by short spikes. How we rank
Printer finder
Is the Flashforge Adventurer 5M right for you?
Answer up to six quick questions and we will recommend the best fit from the 20 printers we have reviewed, at today’s prices. Start with the first one: