Home › Filament › Single-spool filament, 1 kg
Single-spool filament, 1 kg, ranked by £/kg — page 49
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.
By material:PLA (1,545)PETG (518)PLA+ (375)TPU (123)ABS (96)ASA (70)PETG-CF (40)Nylon (23)PC (20)PLA-CF (16)
By finish:Silk (424)Matte (382)Dual & triple colour (217)Rainbow & gradient (216)Translucent (192)Glow in the dark (44)Sparkle & glitter (71)Marble (40)Wood (23)Colour-changing (2)
By weight:Any weightUnder 1 kg (227)1 kg (2,885)2 kg (16)3 kg (11)4 kg (7)5 kg (4)10 kg and over (2)
By colour:Black (260)White (221)Grey (170)Silver (46)Gold (44)Red (165)Orange (100)Yellow (142)Green (273)Blue (276)Purple (96)Pink (110)Brown (90)Beige & natural (53)Transparent (63)
Condition:New (2,514)Amazon Warehouse, any grade (99)Warehouse: Like New (39)Warehouse: Very Good (16)
2,885 listings tracked, 414 on offer right now.
| Product | Material | Weight | Rating | Price | Per kg | Deal |
|---|---|---|---|---|---|---|
 eSUN PETG+ Filament 1KG,High Toughness & Heat Resistance,Translucent Green |
PETG | 1 kg | 4.4 out of 5 (247 Amazon ratings) | — | — | — |
 LOVOON 3D Printer Filament 1.75mm Silk Tri-Colors PLA Red-Yellow-Blue 1KG |
PLA | 1 kg | 4.5 out of 5 (12 Amazon ratings) | — | — | — |
 LOVOON 3D Printer Filament Tricolor PLA Filament 1.75mm Silk Filament 1KG |
PLA | 1 kg | 4.5 out of 5 (13 Amazon ratings) | — | — | — |
 LOVOON 3D Printer Filament 1.75mm Silk Tricolors PLA Blue/Black/Purple 1KG |
PLA | 1 kg | 4.5 out of 5 (12 Amazon ratings) | — | — | — |
 Fockety 3D Printer Filament, 1.75mm 1KG Spool (2.2lbs) Flexible Filament Speci |
TPU | 1 kg | — | — | — | — |
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.