Home › Filament ›
Single-spool filament, 3 kg
Single-spool filament, 3 kg, ranked by £/kg
Every listing we track on Amazon UK that matches all of these filters, ranked by £/kg. Remove a filter with its "All" chip to widen the list.
11 listings tracked.
| Product | Material |
Weight | Rating | Price |
Per kg | Deal |
 eSUN PLA+ Filament 1.75mm 3KG Spool (6.6 LBS), Enhanced Toughness, Blue |
PLA+ |
3 kg | ★★★★½ 4.3 out of 5 (273 Amazon ratings) |
£24.99 |
£8.33 |
14% below
|
 eSUN PLA+ Filament 1.75mm 3KG Spool (6.6 LBS), Enhanced Toughness, Orange |
PLA+ |
3 kg | ★★★★½ 4.3 out of 5 (273 Amazon ratings) |
£39.99 |
£13.33 |
6% below
|
 eSUN PLA+ Filament 1.75mm 3KG Spool (6.6 LBS), Enhanced Toughness, White |
PLA+ |
3 kg | ★★★★½ 4.4 out of 5 (266 Amazon ratings) |
£41.99 |
£14.00 |
— |
no image yet LulzBot PolyLite 3D Printer Filament, PLA, 2.85 mm, 3 kg Reel, True Green |
PLA |
3 kg | — |
£228.95 |
£76.32 |
— |
 eSUN PLA+ Filament 1.75mm 3KG Spool(6.6 LBS), Enhanced Toughness,Cold White |
PLA+ |
3 kg | ★★★★½ 4.3 out of 5 (290 Amazon ratings) |
— |
— |
— |
 eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy |
PLA+ |
3 kg | ★★★½☆ 3.5 out of 5 (4 Amazon ratings) |
— |
— |
— |
| eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy |
PLA+ |
3 kg | ★★★★½ 4.5 out of 5 (4,504 Amazon ratings) |
— |
— |
— |
| eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy |
PLA+ |
3 kg | ★★★★½ 4.5 out of 5 (4,022 Amazon ratings) |
— |
— |
— |
| eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy |
PLA+ |
3 kg | ★★★★½ 4.5 out of 5 (4,022 Amazon ratings) |
— |
— |
— |
| eSUN PLA+ Filament 1.75mm 3KG Spool(6.6 LBS), Enhanced Toughness,Pine Green |
PLA+ |
3 kg | ★★★★½ 4.4 out of 5 (270 Amazon ratings) |
— |
— |
— |
 SUNLU 3KG Spool PETG Filament 1.75mm White, High Toughness 3D Filament |
PETG |
3 kg | ★★★★½ 4.6 out of 5 (6 Amazon ratings) |
— |
— |
— |
Guides
-
Bed adhesion: what actually works
Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
-
Do you need a filament dryer?
Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
-
Filament storage: dry boxes, vacuum bags and desiccant
Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
-
First layer calibration, properly
Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.
Best-selling
Filament by year — which actually sold best, going
back several years, ranked by sales position rather than opinion.