Flashforge AD5X 3D Printer, Multi-Color, 600mm/s, CoreXY, IFS System
4.3 out of 5 (112 Amazon ratings) on Amazon
Price shown was last seen 8 min ago. Amazon prices change frequently — check before buying.
Specification
| Brand | FLASHFORGE |
| Condition | Used — Amazon Warehouse |
| ASIN | B0GLNPDHLW |
| Type | Multi-colour, CoreXY, High-speed |
Our review: Flashforge AD5X
Desk research, not hands-on testing: specifications, independent reviews, documented issues and buyer data. Both scores are calculated from the inputs listed below. How we score
Verdict: The most affordable route in our reviews to built-in four-colour printing, on a fast, self-calibrating CoreXY printer. It is a newer, open-frame design, and published reviews report brittle filaments snapping in its colour system.
10 / 10 Technical difficulty: Low
3.8 / 10 From buyer ratings, track record and known issues
- Four-colour IFS system built in, with no separate add-on unit to buy
- Fast CoreXY motion with automatic bed levelling and vibration compensation
- Tool-free quick-swap nozzle rated to 300°C
- Built-in camera, filament run-out detection and a 4.3-inch touchscreen
- Rated for flexible TPU 95A as well as PLA and PETG
- Open frame: the enclosure is an optional kit, so ABS and ASA are a struggle out of the box
- Every colour change purges filament, adding waste and print time
- Brittle filaments can snap in the IFS feed path
- 220 × 220 × 220 mm build volume
- Launched in 2025, so it has a shorter track record than most printers here
Best for: Buyers who want colourful prints, such as signs, toys and figures, without buying a separate multi-colour add-on.
Look elsewhere if: You want to print ABS or ASA, or mostly make single-colour practical parts where multi-colour adds waste and time for no benefit.
How the ease-of-use score is built
| Arrives assembled: first print in about 30 minutes | ✓ +2 |
| Automatic bed levelling | ✓ +2 |
| Automatic vibration or flow calibration | ✓ +1 |
| App or network printing | ✓ +1 |
| Filament run-out or tangle detection | ✓ +1 |
| Tool-free nozzle swap | ✓ +1 |
| Touchscreen | ✓ +1 |
| Built-in camera | ✓ +1 |
How the reliability indicator is built
| Amazon buyer rating 4.1 out of 5 (3 stars scores 0, 5 stars scores 6) | +3.3 |
| Confidence: none. Amazon pools these 1,951 buyer reviews with the Flashforge Adventurer 5M Pro | +0.0 |
| Track record: model launched 2025 | +1.0 |
| Reported in published reviews: brittle filaments can snap inside the IFS multi-colour feed system (Tom’s Hardware). | -0.5 |
Amazon shows the same rating and review count on a listing of the Flashforge Adventurer 5M Pro, a different printer. Its reviews are pooled across models, so the review count earns no confidence points here.
This printer is sold under several Amazon listings. The buyer rating comes from the one with the most reviews, so it is the same wherever this review appears.
Who it suits
The AD5X is built for people who want colour. Where most multi-colour printers are sold as a printer plus a separate spool unit, the AD5X includes Flashforge’s four-colour IFS (Intelligent Filament System) as standard, on a CoreXY printer derived from the popular Adventurer 5M.
Setting it up
It arrives assembled and runs its own calibration on first start, including bed levelling and vibration compensation. The 4.3-inch touchscreen, Flashforge app and slicer handle the rest. With a camera, run-out detection and a tool-free quick-swap nozzle as well, it ticks every item on our ease-of-use checklist.
Printing with it
Four colours open up signs, labels, toys and figures that would otherwise need painting or manual filament swaps. The usual multi-colour trade-offs apply: each colour change purges plastic and adds time, so prints with many changes can waste a lot of filament. Read whether multi-colour is worth it before paying for colour you may rarely use.
Published reviews report that brittle filaments can snap inside the IFS feed path. That is worth knowing if you like silk or filled filaments, and it costs the AD5X half a point on our reliability indicator.
It is an open-frame printer. The 300°C nozzle is capable, but ABS and ASA warp without an enclosure, which Flashforge offers as an optional kit. See enclosed vs open frame.
Living with it
As a 2025 model, the AD5X has a shorter track record than the other Flashforge printers here, which our reliability indicator reflects. Keep filament dry: moisture makes filament more brittle, which matters more with a multi-colour feed system. See dry boxes and desiccant.
Is today’s price a good deal?
Compare the AD5X with the price of a single-colour printer plus a multi-colour add-on, such as the Bambu Lab A1 with AMS lite. Our review table shows today’s prices, and this page’s price history shows whether now is a low point.
Key specifications
| Type | Filament (FDM), open-frame CoreXY |
| Build volume | 220 × 220 × 220 mm |
| Max nozzle temperature | 300°C |
| Multi-colour | Built-in IFS, 4 colours |
| Calibration | Automatic bed levelling and vibration compensation |
| Nozzle | Tool-free quick-swap |
| Screen | 4.3-inch touchscreen |
| Enclosure | Optional kit |
| On sale since | 2025 |
Sources: Flashforge AD5X product page · Tom’s Hardware AD5X review. Review last updated 11 September 2026. Compare all reviewed printers
Recent price history
| Seen | Price | Condition |
|---|---|---|
| 25 Oct 2026, 16:10 | £290.03 | Warehouse |
| 22 Oct 2026, 16:50 | £299.00 | New |
| 15 Oct 2026, 04:50 | £299.00 | New |
| 11 Sep 2026, 00:10 | £299.00 | New |
Printer finder
Is the Flashforge AD5X right for you?
Answer up to six quick questions and we will recommend the best fit from the 20 printers we have reviewed, at today’s prices. Start with the first one: