WEEFUN Tina2S 3D Printer for Beginners DIY
4.2 out of 5 (8 Amazon ratings) on Amazon
Price shown was last seen 3d ago. Amazon prices change frequently — check before buying.
Specification
| Brand | WEEFUN |
| Condition | New |
| ASIN | B0BKZTZPTF |
Our review: WEEFUN Tina2S
Desk research, not hands-on testing: specifications, independent reviews, documented issues and buyer data. Both scores are calculated from the inputs listed below. How we score
Cheaper right now: another listing of the WEEFUN Tina2S at £188.54. Check what is in the box, as listings often differ by bundle.
Verdict: A tiny, fully assembled, self-levelling printer that is genuinely simple to start with, and a sensible first printer for children. Its 100 mm build volume and 60°C bed mean most adults will outgrow it quickly.
5 / 10 Technical difficulty: Medium
7.1 / 10 From buyer ratings, track record and known issues
- Arrives fully assembled
- Automatic bed levelling
- Wi-Fi printing through the Poloprint cloud app
- Resumes printing after a power cut
- Very quiet, with a quoted 40–50 dB, and small enough for a desk or classroom
- 100 × 105 × 100 mm build volume is very small
- A 60°C heated bed limits it mainly to PLA and TPU
- 2.4-inch screen with a control knob rather than a touchscreen
- No camera, run-out detection we could verify, or quick-swap nozzle
Best for: Children, classrooms and curious beginners who want to try 3D printing for very little money and space.
Look elsewhere if: You want to make household parts of any size, or print PETG, ABS or other materials that need a hotter bed.
How the ease-of-use score is built
| Arrives assembled: first print in about 30 minutes | ✓ +2 |
| Automatic bed levelling | ✓ +2 |
| Automatic vibration or flow calibration | ✗ 0 of 1 |
| App or network printing | ✓ +1 |
| Filament run-out or tangle detection | ✗ 0 of 1 |
| Tool-free nozzle swap | ✗ 0 of 1 |
| Touchscreen | ✗ 0 of 1 |
| Built-in camera | ✗ 0 of 1 |
How the reliability indicator is built
| Amazon buyer rating 4.2 out of 5 (3 stars scores 0, 5 stars scores 6) | +3.6 |
| Confidence from 516 buyer reviews | +1.5 |
| Track record: model launched 2022 | +2.0 |
Amazon pools reviews across this listing’s variations, so the buyer rating describes the product family, not this exact configuration.
This printer is sold under several Amazon listings. The buyer rating comes from the one with the most reviews, so it is the same wherever this review appears.
Who it suits
The Tina2S is a small, light, low-cost printer aimed at beginners and children. It is not trying to compete with the full-size printers in these reviews, and judging it that way misses the point. As a way to find out whether 3D printing appeals, or as a first printer for a child with an adult nearby, it is simple and inexpensive.
Setting it up
It arrives fully assembled and levels its own bed, which removes the two biggest hurdles for a beginner. You can print from a microSD card or over Wi-Fi using the Poloprint cloud app, which also offers ready-made models to print. On the printer, a 2.4-inch screen and a push-and-turn knob handle the menus.
It scores 5 on our ease-of-use checklist, a Medium difficulty rating, because it lacks the extras that make larger printers even more hands-off: automatic vibration or flow calibration, a touchscreen, a camera and a tool-free nozzle. We could not verify filament run-out detection on this WEEFUN model, so it does not get that point either.
Printing with it
The build volume is roughly a 10 cm cube. That is enough for keyrings, small toys, figurines and cable clips, and not much more. See how big a build volume you need. The heated bed reaches 60°C, which suits PLA and TPU but not PETG or ABS.
Living with it
It is quiet, compact and resumes a print after a power cut, which is handy in a busy home or a classroom. Because it is so small, most adults with practical projects in mind will want a full-size printer before long, so if you are buying for yourself, compare it with the Bambu Lab A1 mini, which costs more but grows with you much further.
Amazon pools this listing’s ratings with the older Tina2, so the buyer rating in our reliability indicator describes the Tina2 family rather than the Tina2S alone.
Is today’s price a good deal?
At this end of the market a few pounds matter, so check this page’s price history. And make sure the listing is the Tina2S, with Wi-Fi, rather than an older Tina2 variant.
Key specifications
| Type | Filament (FDM), mini printer |
| Build volume | 100 × 105 × 100 mm |
| Heated bed | Up to 60°C |
| Max speed | 200 mm/s (quoted) |
| Levelling | Automatic |
| Screen | 2.4-inch LCD with control knob |
| Connectivity | Wi-Fi (Poloprint app), microSD card |
| Quoted noise | 40–50 dB |
| On sale since | 2022 |
Sources: WEEFUN Tina2S product page · WEEFUN Tina2S user manual. Review last updated 11 September 2026. Compare all reviewed printers
Printer finder
Is the WEEFUN Tina2S right for you?
Answer up to six quick questions and we will recommend the best fit from the 20 printers we have reviewed, at today’s prices. Start with the first one: