ABS-like resin, ranked by £/litre — on offer now
ABS-like resin is formulated to be less brittle than standard resin, so prints survive drops, snap fits and handling better. Ranked by cost per litre.
By type:
Water-washable (51)
ABS-like (71)
Tough & high-strength (17)
8K & high detail (70)
Clear (36)
Castable (13)
Plant-based (4)
Low odour (11)
7 currently discounted.
| Product | Material | Size | Rating | Price | Per L | Deal |
|---|---|---|---|---|---|---|
| SUNLU ABS Like Resin for 3D Printer 1KG, 405nm UV Curing Photopolymer Rapid 3D | ABS-like resin | 1.00 L | — | £9.69 | £9.69 | Warehouse |
 SUNLU 4KG ABS Like 3D Printer Resin, 405nm UV Curing Photopolymer Rapid 3D Res |
ABS-like resin | 4.00 L | 4.8 out of 5 (1,360 Amazon ratings) | £40.54 | £10.14 | Warehouse |
| SUNLU ABS Like Resin for 3D Printer 1KG, 405nm UV Curing Photopolymer Rapid 3D | ABS-like resin | 1.00 L | — | £10.99 | £10.99 | — |
| ELEGOO ABS-Like Resin 3.0 Plus, Upgraded 3D Printer Photopolymer Resin, Higher | ABS-like resin | 1.00 L | — | £11.04 | £11.04 | — |
| ELEGOO ABS-Like 3D Printer Resin 3.0, 405nm UV-Curing Photopolymer Resin for L | ABS-like resin | 1.00 L | — | £13.59 | £13.59 | — |
| ELEGOO 8K ABS-Like 3D Printer Resin 3.0 Vanilla 1000g for 8K/12K/14K/16K | ABS-like resin | 1.00 L | — | £13.59 | £13.59 | — |
 ANYCUBIC Water Washable ABS-Like Resin 3.0, 2kg HD Grey |
Water-washable resin | 2.00 L | 4.7 out of 5 (145 Amazon ratings) | £42.40 | £21.20 | Warehouse |
ABS-like resin by brand
Guides
-
FEP film: when to replace it, and how to know
The clear film in the bottom of a resin vat is a consumable. What wears it out, the signs it is going, and why replacing it early is cheaper than replacing an LCD.
-
Resin safety: gloves, ventilation and disposal
Uncured resin is a skin sensitiser and the waste is not drain-safe. The short, practical version of what to do — and what people get wrong about IPA and water-washable resin.
-
Resin vat care and cleaning
Most resin print failures trace back to something in the vat. How to filter properly, when to clean it out, and the tool you should never put near the film.
-
Wash and cure stations: worth it?
A combined washer and UV curer is convenience, not magic. What it replaces, when the DIY version is genuinely fine, and the one thing it does better than improvising.