ABS-like resin, ranked by £/litre — page 2
ABS-like resin is formulated to be less brittle than standard resin, so prints survive drops, snap fits and handling better. Ranked by cost per litre.
By type:
Water-washable (51)
ABS-like (71)
Tough & high-strength (17)
8K & high detail (70)
Clear (36)
Castable (13)
Plant-based (4)
Low odour (11)
71 listings tracked, 7 on offer right now.
| Product | Material | Size | Rating | Price | Per L | Deal |
|---|---|---|---|---|---|---|
 ELEGOO ABS-Like Ultra 3D Resin, Extra Strength, Lemon Yellow 1000g |
ABS-like resin | 1.00 L | 4.8 out of 5 (7 Amazon ratings) | £16.14 | £16.14 | 15% below |
 ELEGOO ABS-Like Ultra 3D Resin, Extra Strength, Pumpkin Orange 1000g |
ABS-like resin | 1.00 L | 4.8 out of 5 (7 Amazon ratings) | £16.14 | £16.14 | 15% below |
 ELEGOO ABS-Like Upgraded 3D Printer Resin 2.0, 405nm UV Curing Photopolymer Re |
ABS-like resin | 1.00 L | 4.6 out of 5 (1,842 Amazon ratings) | £16.99 | £16.99 | 22% below |
| ELEGOO Water Washable ABS Like Resin Clear Blue 1kg | Water-washable resin | 1.00 L | — | £17.84 | £17.84 | — |
 ELEGOO ABS Like 3D Printer Upgraded Resin 2.0, 405nm UV Curing Photopolymer Re |
ABS-like resin | 2.00 L | 4.6 out of 5 (1,842 Amazon ratings) | £36.54 | £18.27 | 15% below |
 ANYCUBIC Water Washable ABS-Like Resin 3.0, 2kg HD Grey |
Water-washable resin | 2.00 L | 4.7 out of 5 (145 Amazon ratings) | £42.40 | £21.20 | Warehouse |
 ANYCUBIC Water-washable ABS-Like Resin 3.0, 1kg Grey |
Water-washable resin | 1.00 L | 4.5 out of 5 (38 Amazon ratings) | £24.99 | £24.99 | — |
 Siraya Tech Fast ABS-Like 3D Printer Resin, Non-Brittle, White, 1kg |
ABS-like resin | 1.00 L | 4.6 out of 5 (4,057 Amazon ratings) | £25.89 | £25.89 | — |
 3D Printing Resin 1kg ABS Like Tough 3D Print Resin |
ABS-like resin | 1.00 L | — | £39.79 | £39.79 | — |
| 3D Printing Resin 1000g Tough ABS Like 3D Resin | ABS-like resin | 1.00 L | — | £40.38 | £40.38 | — |
 Abs Like Resin 1kg ABS Like Tough 3D Print Resin |
ABS-like resin | 1.00 L | — | £40.88 | £40.88 | — |
ABS-like resin by brand
Guides
-
FEP film: when to replace it, and how to know
The clear film in the bottom of a resin vat is a consumable. What wears it out, the signs it is going, and why replacing it early is cheaper than replacing an LCD.
-
Resin safety: gloves, ventilation and disposal
Uncured resin is a skin sensitiser and the waste is not drain-safe. The short, practical version of what to do — and what people get wrong about IPA and water-washable resin.
-
Resin vat care and cleaning
Most resin print failures trace back to something in the vat. How to filter properly, when to clean it out, and the tool you should never put near the film.
-
Wash and cure stations: worth it?
A combined washer and UV curer is convenience, not magic. What it replaces, when the DIY version is genuinely fine, and the one thing it does better than improvising.