Home › Resin › 8K & high detail

8K & high-detail resin, ranked by £/litre — page 2

Resin sold for 8K and higher-resolution printers, with fine pigment for crisp miniatures and small detail. It prints on any MSLA printer. Ranked by cost per litre.

70 listings tracked, 14 on offer right now.

Product	Material	Size	Rating	Price	Per L	Deal
Generic High Resolution 3D Print Resin Transparent 1KG Shore Hardness 80, Easi	Standard resin	1.00 L	—	£31.41	£31.41	—
no image yet Xiuganpo 3D Print Resin High Resolution Transparent Water Washable Ideal for J	Water-washable resin	1.00 L	—	£31.56	£31.56	—
no image yet Generic 3D Print Resin Transparent High Resolution 80 Shore Hardness 1KG for J	Standard resin	1.00 L	—	£31.57	£31.57	—
3D Printer UV Resin, Low Viscosity Black Gloss High Resolution Casting Printin	Standard resin	1.00 L	★★★★★ 5.0 out of 5 (1 Amazon ratings)	£32.40	£32.40	15% below
no image yet 3D Print Resin Water Washable High Resolution Curing 80 Shore Hardness 1KG Tra	Water-washable resin	1.00 L	—	£33.49	£33.49	—
Standard 3D Printer Resin 1.2KG Fast UV Curing Plant-Based 3D Resin Liquid Hig	Standard resin	1.20 L	★★★★☆ 4.1 out of 5 (8 Amazon ratings)	£43.23	£36.03	7% below
no image yet Aramox 3D Printer Resin, Curing Resin 1000ml for DLP LCD 3D Printer, 365 to 40	Standard resin	1.00 L	—	£39.77	£39.77	—
no image yet Aramox 3D Printer Resin, UV Curing Resin 1000ml Photosensitive Rigid, 365 to 4	Standard resin	1.00 L	—	£39.95	£39.95	—
Aramox 3D Printer Resin, UV Curing Resin 1000ml Photosensitive Rigid, 365 to 4	Standard resin	1.00 L	—	£39.95	£39.95	7% below
no image yet Cocoarm 3D Printer Resin, UV Curing Resin 1000ml 365 to 405nm Photosensitive R	Standard resin	1.00 L	—	£39.96	£39.96	—

8K & high-detail resin by brand

Guides

• FEP film: when to replace it, and how to know
  The clear film in the bottom of a resin vat is a consumable. What wears it out, the signs it is going, and why replacing it early is cheaper than replacing an LCD.
• Resin safety: gloves, ventilation and disposal
  Uncured resin is a skin sensitiser and the waste is not drain-safe. The short, practical version of what to do — and what people get wrong about IPA and water-washable resin.
• Resin vat care and cleaning
  Most resin print failures trace back to something in the vat. How to filter properly, when to clean it out, and the tool you should never put near the film.
• Wash and cure stations: worth it?
  A combined washer and UV curer is convenience, not magic. What it replaces, when the DIY version is genuinely fine, and the one thing it does better than improvising.