Home › Filament › Eono

Eono filament, ranked by £/kg — on offer now

Every Eono listing in our filament section on Amazon UK, ranked by £/kg. The brand comes from Amazon’s own listing data.

9 currently discounted.

Product	Material	Weight	Rating	Price	Per kg	Deal
EONO Glow-in-the-Dark Blue Starry PLA 3D Printer Filament, 1.75 mm, 1 kg	PLA	1 kg	★★☆☆☆ 1.8 out of 5 (8 Amazon ratings)	£13.55	£13.55	15% below
EONO3D Glitter PLA 3D Printer Filament 1.75mm, 4 x 250g Multicolour 1 kg	PLA	1 kg	★★★★½ 4.6 out of 5 (34 Amazon ratings)	£16.14	£16.14	15% below
EONO Dual Colour Silk PLA 3D Printer Filament, 1.75mm, 4 x 250g (1kg)	PLA	1 kg	★★★★☆ 4.1 out of 5 (115 Amazon ratings)	£16.14	£16.14	19% below
EONO Silk PLA Filament 1.75mm 1kg (2.2lb) Multicolor 4x250g High Gloss	PLA	1 kg	★★★★½ 4.4 out of 5 (11 Amazon ratings)	£16.99	£16.99	15% below
EONO Glow PLA Filament 1.75mm 4x250g, Green Blue Yellow Rainbow 3D	PLA	1 kg	★★★★☆ 3.9 out of 5 (29 Amazon ratings)	£16.99	£16.99	15% below
EONO Glow TPU Filament 1.75mm, 4 x 250g, 95A Flexible, Glow in the Dark	TPU	1 kg	★★☆☆☆ 2.0 out of 5 (2 Amazon ratings)	£17.55	£17.55	—
EONO Silk Rainbow PLA Filament 1.75mm, 4 x 250g Spools, 1kg	PLA	1 kg	★★★☆☆ 3.2 out of 5 (7 Amazon ratings)	£17.84	£17.84	18% below
EONO Glow in the Dark PLA Filament 1.75mm, 4 x 250g Spools, 1kg	PLA	1 kg	★★★½☆ 3.6 out of 5 (12 Amazon ratings)	£18.69	£18.69	15% below
EONO Glow in the Dark PLA Filament 1.75mm, 4 x 250g, 1kg Multicolour	PLA	1 kg	★★★★½ 4.5 out of 5 (2 Amazon ratings)	£19.54	£19.54	15% below

Filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.