Home › Filament › FilaBees

FilaBees filament, ranked by £/kg

Every FilaBees listing in our filament section on Amazon UK, ranked by £/kg. The brand comes from Amazon’s own listing data.

8 listings tracked, 2 on offer right now.

Product	Material	Weight	Rating	Price	Per kg	Deal
FilaBees Transparent Filament Clear PETG 1.75mm,Rapid PETG Red 1kg(2.2lbs)	PETG	1 kg	★★★★★ 5.0 out of 5 (5 Amazon ratings)	£12.99	£12.99	—
FilaBees ASA Filament 1.75mm Sparkle Sky Blue 1kg(2.2lbs) Fit 3D Printer	ASA	1 kg	★★★★½ 4.6 out of 5 (16 Amazon ratings)	£16.99	£16.99	—
FilaBees Transparent Filament Clear PETG 1.75mm,Rapid PETG High Toughness 3D P	PETG	1 kg	★★★★★ 5.0 out of 5 (5 Amazon ratings)	£23.77	£23.77	—
FilaBees 3D Printer Filament Silk PLA Filament 1.75mm, Multicolor Rainbow PLA	PLA	1 kg	★★★★☆ 4.1 out of 5 (35 Amazon ratings)	£27.61	£27.61	—
FilaBees High Speed PETG Filament 1.75mm Metallic Green,High Toughness 3D Prin	PETG	1 kg	★★★★☆ 3.9 out of 5 (3 Amazon ratings)	£28.44	£28.44	—
FilaBees ASA Filament 1.75mm Blue,ASA 3D Printer Filament 1kg(2.2lbs),Heat&Wea	ASA	1 kg	★★★★½ 4.3 out of 5 (5 Amazon ratings)	—	—	—
FilaBees ASA Filament 1.75mm Sparkle Black,ASA 3D Printer Filament,Heat&Weathe	ASA	1 kg	★★★★☆ 3.9 out of 5 (20 Amazon ratings)	—	—	—
FilaBees ASA Filament 1.75mm Sparkle White,ASA 3D Printer Filament,Heat&Weathe	ASA	1 kg	★★★★☆ 4.2 out of 5 (16 Amazon ratings)	—	—	—

Filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.