Home › Filament › HP3DF

HP3DF filament, ranked by £/kg

Every HP3DF listing in our filament section on Amazon UK, ranked by £/kg. The brand comes from Amazon’s own listing data.

8 listings tracked, 2 on offer right now.

Product	Material	Weight	Rating	Price	Per kg	Deal
Noctilucent Filament 1.75mm, Glow PLA+ Filament 1.75mm, Free 3D Pen Filament,3	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,358 Amazon ratings)	£13.70	£13.70	65% below
PLA Plus (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spo	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,355 Amazon ratings)	£33.37	£33.37	23% below
HP3DF PLA Filament, Silk PLA, 3D Printer Filament, PLA Filament 1.75mm Dimensi	PLA	1 kg	★★★★☆ 4.2 out of 5 (72 Amazon ratings)	£37.58	£37.58	—
Gitter Pink PLA 3D Printer Filament PLA 1.75mm HP3DF Premium Toughness Enhance	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,359 Amazon ratings)	£37.85	£37.85	—
Gitter Purple PLA 3D Printer Filament PLA 1.75mm HP3DF Premium Toughness Enhan	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,356 Amazon ratings)	£37.87	£37.87	—
HP3DF Pla Filament 1.75mm,3D Printing Filament,100% Pure PLA +,Dimensional Acc	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,357 Amazon ratings)	£39.24	£39.24	11% below
Noctilucent 3D Printer Filament 1.75mm, PLA+ Filament 1.75mm, Free 3D Pen Fila	PLA+	1 kg	★★★★½ 4.4 out of 5 (1,359 Amazon ratings)	£39.44	£39.44	—
HP3DF PLA Filament, 3D Printer Filament, PLA Filament 1.75mm Dimensional Accur	PLA	1 kg	★★★★☆ 4.2 out of 5 (70 Amazon ratings)	£43.07	£43.07	—

Filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.