Home › Filament › Viviform

Viviform filament, ranked by £/kg

Every Viviform listing in our filament section on Amazon UK, ranked by £/kg. The brand comes from Amazon’s own listing data.

8 listings tracked, 2 on offer right now.

Product	Material	Weight	Rating	Price	Per kg	Deal
Viviform PLA+ Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	★★★½☆ 3.3 out of 5 (3 Amazon ratings)	£12.10	£12.10	—
Viviform PLA+ Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	★★★★☆ 3.8 out of 5 (43 Amazon ratings)	£13.08	£13.08	9% below
Viviform PLA+ Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	★★★★☆ 3.8 out of 5 (43 Amazon ratings)	£13.50	£13.50	11% below
Viviform Silk PLA Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.	PLA	1 kg	★★★★☆ 4.1 out of 5 (19 Amazon ratings)	£14.01	£14.01	5% below
Viviform Silk PLA Filament for 3D Printers, 1 kg Roll, Diameter 1.75 mm +/- 0.	PLA	1 kg	★★★★☆ 4.1 out of 5 (19 Amazon ratings)	£14.17	£14.17	—
no image yet Viviform PLA+ Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	—	£14.21	£14.21	—
no image yet Viviform PLA+ Filament for 3D Printers, 1 kg Roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	—	£14.70	£14.70	—
no image yet Viviform PLA+ Filament for 3D Printers, 1 kg roll, Diameter 1.75 mm +/- 0.03 m	PLA+	1 kg	—	£15.50	£15.50	—

Filament by brand

Guides

• Bed adhesion: what actually works
  Glue sticks, hairspray, rafts, brims and expensive surfaces — an honest ranking of what fixes prints coming loose, starting with the free fix that solves most cases.
• Do you need a filament dryer?
  Wet filament is real and ruins prints, but a dedicated dryer is not the only answer. How to tell if moisture is your problem, and what to do about it.
• Filament storage: dry boxes, vacuum bags and desiccant
  Keeping filament dry is cheaper than drying it out. What actually works, what desiccant to use, and why the little sachet in the bag is already spent.
• First layer calibration, properly
  Nearly every adhesion problem and half of all print failures start in the first layer. How to set Z offset by eye, and what a good first layer actually looks like.

Best-selling Filament by year — which actually sold best, going back several years, ranked by sales position rather than opinion.